我们的2018在线观看免费高清,国产尤物精品视频,亚洲精品在看在线观看

中文版
English
   
 
Temperature cont...
   > ZWK/WCK intell...
   > .Heat treatmen...
   > .DWK-C type co...
Ceramic electr...
Welding rod ov...
Flux drying ma...
Electric air b...
Multipurpose s...
Electric heate...
    Products

  [Close]
Welding preheating and hydrogen elimination equipment, combined type all fiber electric resistance f

Combination type resistance furnace is our company rely on the research institute has just been born of the new furnace. It is a collection of a variety of modern scientific and technological achievements in one. In the structure broke through the shackles of traditional ideas and overcome the old furnace after the completion of the shape, the size is fixed, unable to relocate the ills, furnace body on an innovation and breakthrough. Has nearly a hundred pieces of product of Daqing Petroleum Administration Bureau, Shengli Oilfield, Zhongyuan ethylene, China offshore oil platform manufacturing company, Harbin Boiler Factory and other dozens of users in the success of heat treatment services, user response.


(a) the structure of simple investment province, the rapid cycle of building a furnace is short


This is not the assembly type resistance furnace cover. It has no large kiln trolley and a furnace door, thus eliminating the need for operation of the trolley driving system, door and rise, drop and sealing and pressing mechanism, there is no need for furnace construction plant, equipped with cranes, eliminating the many facilities, built furnace cycle can be shortened by 80 percent.


(two) easy to assemble and easy to move, easy maintenance operation


The stove to the earth for the bottom, the ground covered with aluminium silicate refractory fibre needled blanket or superfine glass quilts do heat preservation, refractory and heat insulation layer, the furnace furnace wall and furnace cover all adopt the special connection elements and I-steel furnace body plate (see Figure 3) splicing together constitute the. Disassembly, relocation is easy, operation, maintenance is also very convenient, workers without long-term training, a little guidance can be quickly mastered.


(three) volume and power are variable, and use a wide range of flexible use


Both the furnace body and the electric heating body of the furnace are composed of an independent element, a furnace body plate and a frame heater. With these components can be built into different shape, volume, and power of the resistance furnace to meet the various petrochemical equipment, pressure container and metal components heat treatment heating needs, not only is very flexible and convenient, and the application is more extensive, we have built a small stove volume 2m3, large volume of more than 560m3. And it can also be smaller or bigger.


(four) computer control temperature difference is small, the realization process of high quality


The stove is according to required size power equipped with one or more than one computer temperature controller, each temperature control instrument which has 12 circuit power supply, 12 thermocouple temperature control power using PID regulation, temperature control accuracy of + - 1 DEG C, the whole furnace in heat preservation phase temperature can be controlled to plus or minus 5 DEG C. Figure 4 and figure 5 is the export products - 300 and 500 type storage tank for CO2 welding after annealing by the curves of the annealing process recording instrument recorded more than 400 degrees C, in Figure 6, is polyester engineering, Tianjin petrochemical joint material for heat exchanger shell welding after annealing by recording instrument of more than 300 DEG annealing process of record curve.


(five) assembled resistance furnace


(1) (right) small assembly of CO2 tank type resistance furnace annealing structures.


Furnace size: length 5.4m x width 2.8m x high 1.5m


(2) (left) regenerator chamber set annealing after welding assembly resistance furnace building


Furnace size: length 5.6m x width 5.4m x high 3.1m


(3) the assembly type resistance furnace for the post weld annealing of the cone transition section of the xylene tower.


Furnace size: length 7.5m x width 7.5m x high 4.5m


(4) the assembly type resistance furnace of the heat exchanger shell (see left and below) after annealing. In change in the middle of the heat exchanger shell has a lug type bearing, in order to reduce the volume of the stove, furnace shape better and for heat exchanger shell which is adapted to the shape, so the furnace is built high in the middle and lower in both sides, its shape is convex shape.


Furnace size: length 4.35m x 13.7m x height: middle 4.5m, two 3.6m


(5) a type of electric resistance furnace for the drying of the lining of the tank and the lifting pipe (see figure below).


Furnace size: length 16.75m x width 4.35m x high 2.54M


(6) (see below) of FCC regenerator shell segment heat treatment to build assembly resistance furnace.


Furnace size: length 10.37m x width 10.17m x high 5.4m


 
Copyright©Wujiang Xinsheng Electric Equipment Co., Ltd.  蘇ICP備11054944號-2   Http:http://diguagame.com   
Tel.:0512-63685811  Fax.:0512-63685810   Mob.:13962586530   Add.:Meiyan Development zone,Wujiang city,China
<menuitem id="numvx"><center id="numvx"></center></menuitem>
  • <option id="numvx"></option>
    主站蜘蛛池模板: 四川少BBB搡BBB爽爽爽| 凤城市| 西青区| 青龙| 澄迈县| 清苑县| 欧美专区日韩视频人妻| 金门县| 鄂伦春自治旗| 亚洲中文无码永久免费| 扎鲁特旗| 欧美拍拍视频免费大全| 妻子6免费完整版高清韩剧| 日本无码动漫av专区| 乾安县| 成全动漫影视大全在线观看国语| 武陟县| 人妻引诱中文字幕| 欧美黑吊大战白妞欧美大片| 成全高清视频免费观看| 南漳县| 日本免费高清一本视频| 陆良县| 精品一区二区三区四区| 香港| 奷小罗莉在线观看国产| 呼图壁县| 欧美老熟妇乱子伦视频| 弥勒县| 欧美大胆人体艺术| 福安市| 精品国产乱码久久久久久口爆| 庆城县| 成全视频在线观看免费观看| 浙江省| 四川省| 化州市| 来宾市| 年辖:市辖区| 亚洲精品一区二区久久| 海门市|